3/18/2024 0 Comments Motorola gp68 r417![]() ![]() ![]() Note: the display blanks when the reset is in progress. Note: as the sequence is entered, the LCD screen displays an 'o' for each digit.Ĥ) Once the sequence has been entered successfully, the LCD screen displays the prompt ErASE?, indicating that the reset procedure is ready to be activated.ĥ) Press the Enter button (top button on left side, same one you set the channels with) to confirm reset process. Keep holding this button until a SPM start-up tone sounds.Ģ) With the radio in Special Programming Mode, press and hold the PTT button.ģ) While holding the PTT button, press 1, 3, 5, 7, 9 in sequence. The radio, upon reset, clears all memory channels stored in the non-volatile memory area, clears all phone number storage locations, and restores the default settings to the different user-modifiable parameters (coded squelch type, squelch level, channel-step size, etc.).ġ) First step is to put the radio in 'Special Progamming Mode', follow these steps.ī- Turn the radio on while holding the 'mem, ^' button. This feature is intended to allow you to erase certain programmable parameters and restore the radio to the factory default settings. If you want to reset the radio, here is the info: Only on some radio's do you need the R417 resistor removed, others will take a key sequence on powerup and go into 'dealer' programming mode. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |